粉碎設備 混合設備 分離設備 濃縮結晶設備 傳質設備 干燥設備 反應設備 換熱設備 制冷設備 空分設備 儲存設備 鍋爐|加熱設備 包裝機械 輸送設備 化工實驗室設備
上海量拓工貿有限公司
上海量拓工貿有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地
化工機械設備網采購部電話：0571-88918531
QQ:2568841715
聯系方式：查看聯系方式
更新時間：2023-05-04 16:44:40瀏覽次數：132次
聯系我時，請告知來自 化工機械設備網OxfordAlloy®Ti-1SPECIFICATIONSCLASSIFICATIONSAWS5
| Oxford Alloy®Ti-1 | |
| SPECIFICATIONS | CLASSIFICATIONS |
| AWS 5.16 | AWS ERTi-1 |
| ASME SFA 5.16 | UNS R50100 |
Oxford Alloy ERTi-1 can be welded by the gas tungsten arc, plasma arc, and gas metal arc processes. The procedures and equipment are gener-ally similar to those used for welding stainless steel or aluminum. Tita-nium and titanium alloys are extremely reactive above 1000 °F. Addi-tional precautions, exceeding those required during the welding of aus-tenitic stainless steel or aluminum alloys, must be taken to shield the weld and hot root side of the joint from air. In welding titanium or titanium alloys, only argon and helium, and occasionally a mixture of these two gases, are used for shielding. The filler metal composition is usually matched to the grade of titanium being welded. The filler metal and the base metal should be meticulously cleaned at the time of welding. Grease and oil accumulated during forming and machining must also be removed before welding to avoid weld contamination.
| AWS Chemical Composition | ||||||
| C | O | H | N | Fe | Ti | |
| 0.03max | 0.03-0.10 | 0.005max | 0.012max | 0.08max | Bal | |
| TYPICAL MECHANICAL PROPERTIES | |
| Hardness: | 34,800 psi 240 MPa |
| Yield strength: | 24,650 psi 170 MPa |
| Elongation: | 24% |
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
化工機械設備網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
